RC Gas Car Stuff

1/10 2.4Ghz Exceed RC Hyper Speed Beginner Version .16 Engine Nitro Powered Off Road Buggy Fire Black
**THE GAS CAR IS BRAND NEW** Exceed RC 1/10 Nitro Competition Racing Remote Control Car, Complete Kit with Body & Engine along with an 2-Channel Pistol Wheel Remote Control w/ 2 SERVOS !!! READY-TO-RACE OUT OF THE BOX !!! * NEW IN A BOX * With the new design 2.4Ghz remote control pistol transmitter is every RC Car Driver dream to get their hands on a full-range 2.4Ghz system. The Car Contains all available hop-up parts; body or engine included!!! Designed to compete in national and local competitions, manufactured at a super-modern facility, Exceed RC's nitro r/c gas cars are created with a mind for high performance racing, scale speed of 55mph+. This 4-Wheel-Driven Gas Powered Car is a 1/10th scale that combines many sophisticated performance-enhancing features that represent a culmination of the long years of Exceed RC's design experience. Engine  Beginner Version, VX 16 Engine,AM Radio, 3 kg steering servo Engine  VX 16 Engine Manufacturer  Vertex Transmission  Single speed  Drive System  Four Wheel Drive Radio System  Two Channel A.M. Length  400mm Front Track  215mm Rear Track  205mm Overall Height 170mm Wheelbase  270mm Front Shock Length  85mm Rear Shock Length  85mm Front Tires  Block Tread Rear Tires  Block Tread Wheel Width  32mm (F) - 40mm (R) Wheel Diameter  86mm Chassis Type  2.5mm 6061 Aluminum Alloy Brake Type  Steel Disc Fuel Tank Capacity  75cc Suspension Type  Plastic bodied oil filled shocks Gear Ratio 1:8.038 (Single Speed) Other   OUR CAR HAS PART COMPATIBILITY & MODIFICATIONS WITH OTHER BRANDS LIKE HPI, TRAXX, ETC.  YOU CAN CHANGE THE BODY-KIT INTO LIKE LEXUS, BMW, MERCEDES, ETC.  YOU CAN ALSO MODIFY/UPGRADE THE ENGINE.  ADD NEW TIRES, NEW SUSPENSION, RE-PAINT,+ MORE!!! THIS IS A GREAT KIT FOR ANY AGE, ANYONE !!! Product Description: - 2-Channel Pistol Radio System Included - Assembled Chassis - VX16 High-Torque and Pull Start Engine with Carburetor - Equipped with Tuned Pipe and Air Filter - Front and rear Bevel Gear differentials - 4 wheel Shaft-Drive System. - Adjustable Wishbone Suspension - No-flex chassis design for better performance. - Alloy aluminum upper plate and chassis. - Oil-Filled shock absorber. - Disc-shaped brake system. - Front universal joint shaft. - 75 cc fuel pressure tank. - High impact wheels. - High traction radial tires. - Servo saver linkage system. - Stock engine muffler system. PACKAGE INCLUDE: - 1 x BRAND NEW 15CX ENGINE - 1 x PAINTED BODY CHASSIS - 2.4Ghz GUN-STYLE REMOTE CONTROL

Buy from NitroRCX for $119.70

1/10 2.4Ghz Exceed RC Hyper Speed Beginner Version .16 Engine Nitro Powered Off Road Buggy Fire Blue
**THE GAS CAR IS BRAND NEW** Exceed RC 1/10 Nitro Competition Racing Remote Control Car, Complete Kit with Body & Engine along with an 2-Channel Pistol Wheel Remote Control w/ 2 SERVOS !!! READY-TO-RACE OUT OF THE BOX !!! * NEW IN A BOX * With the new design 2.4Ghz remote control pistol transmitter is every RC Car Driver dream to get their hands on a full-range 2.4Ghz system. The Car Contains all available hop-up parts; body or engine included!!! Designed to compete in national and local competitions, manufactured at a super-modern facility, Exceed RC's nitro r/c gas cars are created with a mind for high performance racing, scale speed of 55mph+. This 4-Wheel-Driven Gas Powered Car is a 1/10th scale that combines many sophisticated performance-enhancing features that represent a culmination of the long years of Exceed RC's design experience. Engine  Beginner Version, VX 16 Engine,AM Radio, 3 kg steering servo Engine  VX 16 Engine Manufacturer  Vertex Transmission  Single speed  Drive System  Four Wheel Drive Radio System  Two Channel A.M. Length  400mm Front Track  215mm Rear Track  205mm Overall Height 170mm Wheelbase  270mm Front Shock Length  85mm Rear Shock Length  85mm Front Tires  Block Tread Rear Tires  Block Tread Wheel Width  32mm (F) - 40mm (R) Wheel Diameter  86mm Chassis Type  2.5mm 6061 Aluminum Alloy Brake Type  Steel Disc Fuel Tank Capacity  75cc Suspension Type  Plastic bodied oil filled shocks Gear Ratio 1:8.038 (Single Speed) Other   OUR CAR HAS PART COMPATIBILITY & MODIFICATIONS WITH OTHER BRANDS LIKE HPI, TRAXX, ETC.  YOU CAN CHANGE THE BODY-KIT INTO LIKE LEXUS, BMW, MERCEDES, ETC.  YOU CAN ALSO MODIFY/UPGRADE THE ENGINE.  ADD NEW TIRES, NEW SUSPENSION, RE-PAINT,+ MORE!!! THIS IS A GREAT KIT FOR ANY AGE, ANYONE !!! Product Description: - 2-Channel Pistol Radio System Included - Assembled Chassis - VX16 High-Torque and Pull Start Engine with Carburetor - Equipped with Tuned Pipe and Air Filter - Front and rear Bevel Gear differentials - 4 wheel Shaft-Drive System. - Adjustable Wishbone Suspension - No-flex chassis design for better performance. - Alloy aluminum upper plate and chassis. - Oil-Filled shock absorber. - Disc-shaped brake system. - Front universal joint shaft. - 75 cc fuel pressure tank. - High impact wheels. - High traction radial tires. - Servo saver linkage system. - Stock engine muffler system. PACKAGE INCLUDE: - 1 x BRAND NEW 15CX ENGINE - 1 x PAINTED BODY CHASSIS - 2.4Ghz GUN-STYLE REMOTE CONTROL

Buy from NitroRCX for $119.70

1/10 Exceed RC Electric Brushless Pro Version SunFire Off Road RTR Buggy Baha Blue
This car is much faster than some nitro gas-powered cars!   1/10 Off Road Electric Buggy Brushless Version w/ KV 3300 Motor!! The most popular 1/10 4 wheel drive electric power off-road buggy in the world just got better! At each evolutionary step, the SunFire has been improved upon to keep it at the peak of the RC off-road buggy field. So how do you make an SunFire better? Extra speed, extra adjustability, extra toughness! The new SunFire is packed with features that have been suggested by SunFire owners: More room for the electronics, easier access to the differentials and more suspension adjustability. The result is the best SunFire ever.   The heart of the SunFire line has always been a Brushless Motor KV 3300 with reliable and consistent power for tough off-road driving.       Even the storm cellar can't stop the Sunfire Buggy!!  Exceed's New Electric Buggy hits the competition with the force of an F-5!!!  The RC Brushless KV 3300 High Torque motor produces outstanding power!!!  Did someone say "JUMPS"?........How high do you want to go?  The long travel suspension and oil-filled shocks help absorb just about anything you can drive it over.  The linear motor driven brakes ensure "on-a-dime" stopping power, even at these speeds!!!........but who wants to stop when you are having this much fun? RTR ¨C factory assembled with installed motor and radio gear makes getting started easy The 2.5mm lightweight aluminum alloy chassis provides excellent performance and durability     New lightweight suspension arms deliver quick suspension response and reduce the critical sprung weight and overall weight of the car Oil filled shocks with firm tuned springs keep the wheels on the ground     The SunFire will be available "Ready-To-Run" making it the highest on-road performance 4-wheel drive Electric Power racing car available to everybody Completely preassembled with high quality radio gear, painted, trimmed and ready to roll The new Brushless motor KV 3300 provides reliable and consistent power for high performance on-road driving The 2.5mm lightweight aluminum alloy chassis provides excellent performance and durability Excellent differential system design provides quick access to the front or rear differential by removing only few screws. You can now access the front and rear differential for easy maintenance New lightweight suspension arms deliver quick suspension response and reduce the critical sprung weight and overall weight of the car High capacity battery provides long run times The high quality AM transmitter and receiver work together to let you precisely control your car. Length: 400 MM 15.7 inch. Width: 250 MM 9.8 inch. Height: 160 MM 6.3 inch. Wheelbase: 275 MM 10.8 inch. Ground Clearance: 26 MM 1.02 inch. Diameter Of Wheel: 86*32 MM (F) 86*40 MM (R)   Battery: 7.2V 1800mAh Ni-Mh Motor: Brushless Motor K

Buy from NitroRCX for $159.70

1/8 2.4Ghz Exceed RC Rally 8 .21 Nitro Gas Powered Almost Ready to Run ARTR Remote Control 4WD Rally Car Carbon Blue
The Rally 8 by Exceed RC is a high quality top of the range model for serious racers. If you have had a 1/10th nitro model before and are ready to take the hobby to the next level then this is the model for you. If you compare the specs and features below to others nitro cars on the market you will see this model is awesome. With a powerful W/VX .21 engine, thick aluminum parts, polished aluminum pipe and a powerful 4WD suspension system, the features just go on and on. Every part and fitting has been carefully thought out to give maximum performance. This is a 1:8 scale model and is a lot chunkier than the 1:10 scale ones. Not really for beginners but if you are ready to take the next step in nitro models or are a patient beginner who wants a model they can go all the way with then they don't come much better than this! The only things needed to use are TX/RX, fuel and a glow start.   Features 1.Four wheel drive system 2.Powerful Suspension arm with adjustable width 3.High quality main and diff. gears 4.6061/T6 anodized aluminum radio tray and chassis 5.Solid universal joint cups/High quality ball bearings complete 6.Large off road slight block tires and spoke wheel rims. 7.Disc brake system provides quick brake response 8.Extra large leak proof fuel tank with spring loaded fill cover and a long fuel pipe for quick re-fueling. 9.High flow duty foam air filter (Anodized aluminum capped cover is for optional use) 10.Polished exhaust pipe and manifold 11.6mm aluminum rear sway arm **TX/RX are required     ARTR ¨C factory assembled with installed engine makes getting started easy The lightweight aluminum alloy chassis provides excellent performance and durability Front & rear skid plates for impact protection Long stroke oil filled shocks with firm tuned springs keep the wheels on the ground Complete set of ball bearings for low friction and durability High capacity fuel tank with perfect caliber makes it impossible to overflow and provides long run times New lightweight suspension arms deliver quick suspension response and reduce the critical sprung weight and overall weight of the truck The new .21 engine features a new crankcase and upgrades to the cylinder, piston, connecting rod and crankshaft, delivers more power, more torque and extra cooling. Specifications Engine  .21 W/VX Transmission  Front, Center, and Rear Geared Sealed Differentials Gear Ratio 1:17.5 Single Speed Drive System  Four Wheel Drive Length  530mm Height (Overall) 205mm Wheelbase  365mm Front Tires  Off Road Knobby Rear Tires  Off Road Knobby Wheel Diameter  120mm Wheel Width 82mm Differential Type  Four Bevel Gear Chassis Type  2.5mm 6061 Aluminum Alloy Brake Type  Dual Steel Disc Fuel Tank Capacity  125cc Suspension Type  Aluminum Body, Oil Filled Shocks Ground Clearance 55mm Weight 3800g **TX/RX are required More Features & Pictures of the 1/8th Quality Electronics and Aluminum Parts Di

Buy from NitroRCX for $259.95

1/8 2.4Ghz Exceed RC Rally 8 .21 Nitro Gas Powered Almost Ready to Run ARTR Remote Control 4WD Rally Car Stripe Blue
The Rally 8 by Exceed RC is a high quality top of the range model for serious racers. If you have had a 1/10th nitro model before and are ready to take the hobby to the next level then this is the model for you. If you compare the specs and features below to others nitro cars on the market you will see this model is awesome. With a powerful W/VX .21 engine, thick aluminum parts, polished aluminum pipe and a powerful 4WD suspension system, the features just go on and on. Every part and fitting has been carefully thought out to give maximum performance. This is a 1:8 scale model and is a lot chunkier than the 1:10 scale ones. Not really for beginners but if you are ready to take the next step in nitro models or are a patient beginner who wants a model they can go all the way with then they don't come much better than this! The only things needed to use are TX/RX, fuel and a glow start.     Features 1.Four wheel drive system 2.Powerful Suspension arm with adjustable width 3.High quality main and diff. gears 4.6061/T6 anodized aluminum radio tray and chassis 5.Solid universal joint cups/High quality ball bearings complete 6.Large off road slight block tires and spoke wheel rims. 7.Disc brake system provides quick brake response 8.Extra large leak proof fuel tank with spring loaded fill cover and a long fuel pipe for quick re-fueling. 9.High flow duty foam air filter (Anodized aluminum capped cover is for optional use) 10.Polished exhaust pipe and manifold 11.6mm aluminum rear sway arm **TX/RX are required     ARTR ¨C factory assembled with installed engine makes getting started easy The lightweight aluminum alloy chassis provides excellent performance and durability Front & rear skid plates for impact protection Long stroke oil filled shocks with firm tuned springs keep the wheels on the ground Complete set of ball bearings for low friction and durability High capacity fuel tank with perfect caliber makes it impossible to overflow and provides long run times New lightweight suspension arms deliver quick suspension response and reduce the critical sprung weight and overall weight of the truck The new .21 engine features a new crankcase and upgrades to the cylinder, piston, connecting rod and crankshaft, delivers more power, more torque and extra cooling. Specifications Engine  .21 W/VX Transmission  Front, Center, and Rear Geared Sealed Differentials Gear Ratio 1:17.5 Single Speed Drive System  Four Wheel Drive Length  530mm Height (Overall) 205mm Wheelbase  365mm Front Tires  Off Road Knobby Rear Tires  Off Road Knobby Wheel Diameter  120mm Wheel Width 82mm Differential Type  Four Bevel Gear Chassis Type  2.5mm 6061 Aluminum Alloy Brake Type  Dual Steel Disc Fuel Tank Capacity  125cc Suspension Type  Aluminum Body, Oil Filled Shocks Ground Clearance 55mm Weight 3800g **TX/RX are required More Features & Pictures of the 1/8th Quality Electronics and Aluminum P

Buy from NitroRCX for $259.95

1/8th Exceed RC Mad Code GP Gas Powered Short Course Racing Edition Almost Ready to Run ARTR Rally Car (Blue)
Designed to look just like the full-size Rally Cars, 4WD Racing Edition GP MAD CODE that runs in short course off-road series like the other brand models. Team Exceed RC is proud to announce the Mad Code as the latest edition to our line of 1:8 scale, GP Gas Powered 4WD race truck rally car. Each Mad Code comes decked out with one of three fully racing style truck bodies, wheels and tires. This is the high-performance R/C Rally car in its' class built with Level .28 engine for speed of swiftness, polished aluminum chassis to provide clean look as well as sturdiness, adjustable shocks to have perfect landing, a bigger fuel tank that can hold 150cc. The Exceed RC Mad Code was designed to meet other racing rally cars around the world. It's all here, from the suspension travel, to painted body. The result is the Exceed RC Mad Code, a creation of an unparalleled experience at a level of performance that has never been seen. Underneath the beautifully finished body, and wheels, beats the heart of a Mad Code. The Mad Code comes fully assembled and ready to go. Team Exceed RC 2.4Ghz Radio system are factory installed. The differentials and shocks come filled with the proper silicone fluids, making it faster and easier than ever to get Exceed RC Mad Code performance out of the box and into the dirt! When we created the Mad Code, we knew we had made something very special.   Features: Mad Code ARTR Molded battery tray supports two ROAR-approved 1:8 scale size .28 Engine Factory painted and finished short course truck body. Mounted and assembled scale wheels & tires with foam inserts and bead guards. Low Center of Gravity Design Fuel Tank Alloy steel Turnbuckles for quick adjustability and tuning Dual Bell-crank steering for more consistent steering and reduced bump-steer on rough surfaces Carefully placed battery compartments and center mounted ESC platform and for balance (Electric) Durable and thick hardened plastic suspension arms Anodized 6061 T6 3MM aluminum chassis plate Anodized 4MM Front and Rear aluminum shock tower Massive pre-glued 4.75" Tires mounted on hardened chrome wheels with 17mm hex hub Silicon Fluid sealed Front, Center, and Rear hardened and coated steel gear differentials Heavy duty metal geared steering servo Adjustable 16MM Big Bore threaded aluminum shocks Anodized Aluminum Chassis plate stiffeners Anodized Aluminum differential plates Anodized Aluminum Steering arm Multi-piece adjustable anti roll bar front and rear Full Sealed Ball Bearing Set Front Constant Velocity Driveshaft (CVD) Adjustable Front and Rear Roll Center Engine .28 Cubic Inches 4.57cc Nitro Powered Engine Bearing Ball Bearing Length 25 inches (635mm) Width 11.81 inches (300mm) Height 7.68 inches (195mm) Wheelbase 14.37 inches (365mm) Gear Ratio 1:11:7 **TX/RX are required

Buy from NitroRCX for $284.00

1/8th Exceed RC Mad Code GP Gas Powered Short Course Racing Edition Almost Ready to Run ARTR Rally Car (Green)
Designed to look just like the full-size Rally Cars, 4WD Racing Edition GP MAD CODE that runs in short course off-road series like the other brand models. Team Exceed RC is proud to announce the Mad Code as the latest edition to our line of 1:8 scale, GP Gas Powered 4WD race truck rally car. Each Mad Code comes decked out with one of three fully racing style truck bodies, wheels and tires. This is the high-performance R/C Rally car in its' class built with Level .28 engine for speed of swiftness, polished aluminum chassis to provide clean look as well as sturdiness, adjustable shocks to have perfect landing, a bigger fuel tank that can hold 150cc. The Exceed RC Mad Code was designed to meet other racing rally cars around the world. It's all here, from the suspension travel, to painted body. The result is the Exceed RC Mad Code, a creation of an unparalleled experience at a level of performance that has never been seen. Underneath the beautifully finished body, and wheels, beats the heart of a Mad Code. The Mad Code comes fully assembled and ready to go. Team Exceed RC 2.4Ghz Radio system are factory installed. The differentials and shocks come filled with the proper silicone fluids, making it faster and easier than ever to get Exceed RC Mad Code performance out of the box and into the dirt! When we created the Mad Code, we knew we had made something very special.   Features: Mad Code ARTR Molded battery tray supports two ROAR-approved 1:8 scale size .28 Engine Factory painted and finished short course truck body. Mounted and assembled scale wheels & tires with foam inserts and bead guards. Low Center of Gravity Design Fuel Tank Alloy steel Turnbuckles for quick adjustability and tuning Dual Bell-crank steering for more consistent steering and reduced bump-steer on rough surfaces Carefully placed battery compartments and center mounted ESC platform and for balance (Electric) Durable and thick hardened plastic suspension arms Anodized 6061 T6 3MM aluminum chassis plate Anodized 4MM Front and Rear aluminum shock tower Massive pre-glued 4.75" Tires mounted on hardened chrome wheels with 17mm hex hub Silicon Fluid sealed Front, Center, and Rear hardened and coated steel gear differentials Heavy duty metal geared steering servo Adjustable 16MM Big Bore threaded aluminum shocks Anodized Aluminum Chassis plate stiffeners Anodized Aluminum differential plates Anodized Aluminum Steering arm Multi-piece adjustable anti roll bar front and rear Full Sealed Ball Bearing Set Front Constant Velocity Driveshaft (CVD) Adjustable Front and Rear Roll Center Engine .28 Cubic Inches 4.57cc Nitro Powered Engine Bearing Ball Bearing Length 25 inches (635mm) Width 11.81 inches (300mm) Height 7.68 inches (195mm) Wheelbase 14.37 inches (365mm) Gear Ratio 1:11:7 **TX/RX are required

Buy from NitroRCX for $284.00

1/8th Exceed RC Mad Code GP Gas Powered Short Course Racing Edition Almost Ready to Run ARTR Rally Car (Red)
Designed to look just like the full-size Rally Cars, 4WD Racing Edition GP MAD CODE that runs in short course off-road series like the other brand models. Team Exceed RC is proud to announce the Mad Code as the latest edition to our line of 1:8 scale, GP Gas Powered 4WD race truck rally car. Each Mad Code comes decked out with one of three fully racing style truck bodies, wheels and tires. This is the high-performance R/C Rally car in its' class built with Level .28 engine for speed of swiftness, polished aluminum chassis to provide clean look as well as sturdiness, adjustable shocks to have perfect landing, a bigger fuel tank that can hold 150cc. The Exceed RC Mad Code was designed to meet other racing rally cars around the world. It's all here, from the suspension travel, to painted body. The result is the Exceed RC Mad Code, a creation of an unparalleled experience at a level of performance that has never been seen. Underneath the beautifully finished body, and wheels, beats the heart of a Mad Code. The Mad Code comes fully assembled and ready to go. Team Exceed RC 2.4Ghz Radio system are factory installed. The differentials and shocks come filled with the proper silicone fluids, making it faster and easier than ever to get Exceed RC Mad Code performance out of the box and into the dirt! When we created the Mad Code, we knew we had made something very special.   Features: Mad Code ARTR Molded battery tray supports two ROAR-approved 1:8 scale size .28 Engine Factory painted and finished short course truck body. Mounted and assembled scale wheels & tires with foam inserts and bead guards. Low Center of Gravity Design Fuel Tank Alloy steel Turnbuckles for quick adjustability and tuning Dual Bell-crank steering for more consistent steering and reduced bump-steer on rough surfaces Carefully placed battery compartments and center mounted ESC platform and for balance (Electric) Durable and thick hardened plastic suspension arms Anodized 6061 T6 3MM aluminum chassis plate Anodized 4MM Front and Rear aluminum shock tower Massive pre-glued 4.75" Tires mounted on hardened chrome wheels with 17mm hex hub Silicon Fluid sealed Front, Center, and Rear hardened and coated steel gear differentials Heavy duty metal geared steering servo Adjustable 16MM Big Bore threaded aluminum shocks Anodized Aluminum Chassis plate stiffeners Anodized Aluminum differential plates Anodized Aluminum Steering arm Multi-piece adjustable anti roll bar front and rear Full Sealed Ball Bearing Set Front Constant Velocity Driveshaft (CVD) Adjustable Front and Rear Roll Center Engine .28 Cubic Inches 4.57cc Nitro Powered Engine Bearing Ball Bearing Length 25 inches (635mm) Width 11.81 inches (300mm) Height 7.68 inches (195mm) Wheelbase 14.37 inches (365mm) Gear Ratio 1:11:7 **TX/RX are required

Buy from NitroRCX for $284.00

1/8th Exceed RC Mad Code GP Gas Powered Short Course Racing Edition RTR Ready to Run Rally Car (Blue)
Designed to look just like the full-size Rally Cars, 4WD Racing Edition GP MAD CODE that runs in short course off-road series like the other brand models. Team Exceed RC is proud to announce the Mad Code as the latest edition to our line of 1:8 scale, GP Gas Powered 4WD race truck rally car. Each Mad Code comes decked out with one of three fully racing style truck bodies, wheels and tires. This is the high-performance R/C Rally car in its' class built with Level .28 engine for speed of swiftness, polished aluminum chassis to provide clean look as well as sturdiness, adjustable shocks to have perfect landing, a bigger fuel tank that can hold 150cc. The Exceed RC Mad Code was designed to meet other racing rally cars around the world. It's all here, from the suspension travel, to painted body. The result is the Exceed RC Mad Code, a creation of an unparalleled experience at a level of performance that has never been seen. Underneath the beautifully finished body, and wheels, beats the heart of a Mad Code. The Mad Code comes fully assembled and ready to go. Team Exceed RC 2.4Ghz Radio system are factory installed. The differentials and shocks come filled with the proper silicone fluids, making it faster and easier than ever to get Exceed RC Mad Code performance out of the box and into the dirt! When we created the Mad Code, we knew we had made something very special.   Features: Mad Code RTR Molded battery tray supports two ROAR-approved 1:8 scale size .28 Engine Factory painted and finished short course truck body. Mounted and assembled scale wheels & tires with foam inserts and bead guards. 2.4Ghz Pistol Sport Radio Transmitter Low Center of Gravity Design Fuel Tank Alloy steel Turnbuckles for quick adjustability and tuning Dual Bell-crank steering for more consistent steering and reduced bump-steer on rough surfaces Carefully placed battery compartments and center mounted ESC platform and for balance (Electric) Durable and thick hardened plastic suspension arms Anodized 6061 T6 3MM aluminum chassis plate Anodized 4MM Front and Rear aluminum shock tower Massive pre-glued 4.75" Tires mounted on hardened chrome wheels with 17mm hex hub Silicon Fluid sealed Front, Center, and Rear hardened and coated steel gear differentials Heavy duty metal geared steering servo Adjustable 16MM Big Bore threaded aluminum shocks Anodized Aluminum Chassis plate stiffeners Anodized Aluminum differential plates Anodized Aluminum Steering arm Multi-piece adjustable anti roll bar front and rear Full Sealed Ball Bearing Set Front Constant Velocity Driveshaft (CVD) Adjustable Front and Rear Roll Center Engine .28 Cubic Inches 4.57cc Nitro Powered Engine Bearing Ball Bearing Length 25 inches (635mm) Width 11.81 inches (300mm) Height 7.68 inches (195mm) Wheelbase 14.37 inches (365mm) Gear Ratio 1:11:7 Radio 2.4Ghz Pistol Remote Control

Buy from NitroRCX for $299.00

1/8th Exceed RC Mad Code GP Gas Powered Short Course Racing Edition RTR Ready to Run Rally Car (Green)
Designed to look just like the full-size Rally Cars, 4WD Racing Edition GP MAD CODE that runs in short course off-road series like the other brand models. Team Exceed RC is proud to announce the Mad Code as the latest edition to our line of 1:8 scale, GP Gas Powered 4WD race truck rally car. Each Mad Code comes decked out with one of three fully racing style truck bodies, wheels and tires. This is the high-performance R/C Rally car in its' class built with Level .28 engine for speed of swiftness, polished aluminum chassis to provide clean look as well as sturdiness, adjustable shocks to have perfect landing, a bigger fuel tank that can hold 150cc. The Exceed RC Mad Code was designed to meet other racing rally cars around the world. It's all here, from the suspension travel, to painted body. The result is the Exceed RC Mad Code, a creation of an unparalleled experience at a level of performance that has never been seen. Underneath the beautifully finished body, and wheels, beats the heart of a Mad Code. The Mad Code comes fully assembled and ready to go. Team Exceed RC 2.4Ghz Radio system are factory installed. The differentials and shocks come filled with the proper silicone fluids, making it faster and easier than ever to get Exceed RC Mad Code performance out of the box and into the dirt! When we created the Mad Code, we knew we had made something very special.   Features: Mad Code RTR Molded battery tray supports two ROAR-approved 1:8 scale size .28 Engine Factory painted and finished short course truck body. Mounted and assembled scale wheels & tires with foam inserts and bead guards. 2.4Ghz Pistol Sport Radio Transmitter Low Center of Gravity Design Fuel Tank Alloy steel Turnbuckles for quick adjustability and tuning Dual Bell-crank steering for more consistent steering and reduced bump-steer on rough surfaces Carefully placed battery compartments and center mounted ESC platform and for balance (Electric) Durable and thick hardened plastic suspension arms Anodized 6061 T6 3MM aluminum chassis plate Anodized 4MM Front and Rear aluminum shock tower Massive pre-glued 4.75" Tires mounted on hardened chrome wheels with 17mm hex hub Silicon Fluid sealed Front, Center, and Rear hardened and coated steel gear differentials Heavy duty metal geared steering servo Adjustable 16MM Big Bore threaded aluminum shocks Anodized Aluminum Chassis plate stiffeners Anodized Aluminum differential plates Anodized Aluminum Steering arm Multi-piece adjustable anti roll bar front and rear Full Sealed Ball Bearing Set Front Constant Velocity Driveshaft (CVD) Adjustable Front and Rear Roll Center Engine .28 Cubic Inches 4.57cc Nitro Powered Engine Bearing Ball Bearing Length 25 inches (635mm) Width 11.81 inches (300mm) Height 7.68 inches (195mm) Wheelbase 14.37 inches (365mm) Gear Ratio 1:11:7 Radio 2.4Ghz Pistol Remote Control

Buy from NitroRCX for $299.00

1/8Th Mad Code GP Gas Powered Short Course Limited Edition Almost Ready to Run ARTR Rally Car (Blue)
Designed to look just like the full-size Rally Cars, 4WD Racing Edition GP MAD CODE that runs in short course off-road series like the other brand models. Team Exceed RC is proud to announce the Mad Code as the latest edition to our line of 1:8 scale, GP Gas Powered 4WD race truck rally car. Each Mad Code comes decked out with one of three fully racing style truck bodies, wheels and tires. This is the high-performance R/C Rally car in its' class built with Level .21 engine for speed of swiftness, polished aluminum chassis to provide clean look as well as sturdiness, adjustable shocks to have perfect landing, a bigger fuel tank that can hold 150cc. The Exceed RC Mad Code was designed to meet other racing rally cars around the world. It's all here, from the suspension travel, to painted body. The result is the Exceed RC Mad Code, a creation of an unparalleled experience at a level of performance that has never been seen. Underneath the beautifully finished body, and wheels, beats the heart of a Mad Code. The Mad Code comes fully assembled and almost ready to go. The differentials and shocks come filled with the proper silicone fluids, making it faster and easier than ever to get Exceed RC Mad Code performance out of the box and into the dirt! When we created the Mad Code, we knew we had made something very special for you.   Features: Mad Code ARTR Molded battery tray supports two ROAR-approved 1:8 scale size .21 Engine Factory painted and finished short course truck body. Mounted and assembled scale wheels & tires with foam inserts and bead guards. Low Center of Gravity Design Fuel Tank Alloy steel Turnbuckles for quick adjustability and tuning Dual Bell-crank steering for more consistent steering and reduced bump-steer on rough surfaces Carefully placed battery compartments and center mounted ESC platform and for balance (Electric) Durable and thick hardened plastic suspension arms Anodized 6061 T6 3MM aluminum chassis plate Anodized 4MM Front and Rear aluminum shock tower Massive pre-glued 4.75" Tires mounted on hardened chrome wheels with 17mm hex hub Silicon Fluid sealed Front, Center, and Rear hardened and coated steel gear differentials Heavy duty metal geared steering servo Adjustable threaded aluminum shocks Anodized Aluminum Chassis plate stiffeners Anodized Aluminum differential plates Anodized Aluminum Steering arm Multi-piece adjustable anti roll bar front and rear Full Sealed Ball Bearing Set Front Constant Velocity Driveshaft (CVD) Adjustable Front and Rear Roll Center ** TX/RX are required Engine .21 Cubic Inches 3.5cc Nitro Powered Engine Bearing Ball Bearing Length 25 inches (635mm) Width 11.81 inches (300mm) Height 7.68 inches (195mm) Wheelbase 14.37 inches (365mm) Gear Ratio 1:11:7

Buy from NitroRCX for $244.00

1/8Th Mad Code GP Gas Powered Short Course Limited Edition Almost Ready to Run ARTR Rally Car (Green)
Designed to look just like the full-size Rally Cars, 4WD Racing Edition GP MAD CODE that runs in short course off-road series like the other brand models. Team Exceed RC is proud to announce the Mad Code as the latest edition to our line of 1:8 scale, GP Gas Powered 4WD race truck rally car. Each Mad Code comes decked out with one of three fully racing style truck bodies, wheels and tires. This is the high-performance R/C Rally car in its' class built with Level .21 engine for speed of swiftness, polished aluminum chassis to provide clean look as well as sturdiness, adjustable shocks to have perfect landing, a bigger fuel tank that can hold 150cc. The Exceed RC Mad Code was designed to meet other racing rally cars around the world. It's all here, from the suspension travel, to painted body. The result is the Exceed RC Mad Code, a creation of an unparalleled experience at a level of performance that has never been seen. Underneath the beautifully finished body, and wheels, beats the heart of a Mad Code. The Mad Code comes fully assembled and almost ready to go. The differentials and shocks come filled with the proper silicone fluids, making it faster and easier than ever to get Exceed RC Mad Code performance out of the box and into the dirt! When we created the Mad Code, we knew we had made something very special for you.   Features: Mad Code ARTR Molded battery tray supports two ROAR-approved 1:8 scale size .21 Engine Factory painted and finished short course truck body. Mounted and assembled scale wheels & tires with foam inserts and bead guards. Low Center of Gravity Design Fuel Tank Alloy steel Turnbuckles for quick adjustability and tuning Dual Bell-crank steering for more consistent steering and reduced bump-steer on rough surfaces Carefully placed battery compartments and center mounted ESC platform and for balance (Electric) Durable and thick hardened plastic suspension arms Anodized 6061 T6 3MM aluminum chassis plate Anodized 4MM Front and Rear aluminum shock tower Massive pre-glued 4.75" Tires mounted on hardened chrome wheels with 17mm hex hub Silicon Fluid sealed Front, Center, and Rear hardened and coated steel gear differentials Heavy duty metal geared steering servo Adjustable threaded aluminum shocks Anodized Aluminum Chassis plate stiffeners Anodized Aluminum differential plates Anodized Aluminum Steering arm Multi-piece adjustable anti roll bar front and rear Full Sealed Ball Bearing Set Front Constant Velocity Driveshaft (CVD) Adjustable Front and Rear Roll Center ** TX/RX are required Engine .21 Cubic Inches 3.5cc Nitro Powered Engine Bearing Ball Bearing Length 25 inches (635mm) Width 11.81 inches (300mm) Height 7.68 inches (195mm) Wheelbase 14.37 inches (365mm) Gear Ratio 1:11:7

Buy from NitroRCX for $244.00

1/8Th Mad Code GP Gas Powered Short Course Limited Edition Almost Ready to Run ARTR Rally Car (Red)
Designed to look just like the full-size Rally Cars, 4WD Racing Edition GP MAD CODE that runs in short course off-road series like the other brand models. Team Exceed RC is proud to announce the Mad Code as the latest edition to our line of 1:8 scale, GP Gas Powered 4WD race truck rally car. Each Mad Code comes decked out with one of three fully racing style truck bodies, wheels and tires. This is the high-performance R/C Rally car in its' class built with Level .21 engine for speed of swiftness, polished aluminum chassis to provide clean look as well as sturdiness, adjustable shocks to have perfect landing, a bigger fuel tank that can hold 150cc. The Exceed RC Mad Code was designed to meet other racing rally cars around the world. It's all here, from the suspension travel, to painted body. The result is the Exceed RC Mad Code, a creation of an unparalleled experience at a level of performance that has never been seen. Underneath the beautifully finished body, and wheels, beats the heart of a Mad Code. The Mad Code comes fully assembled and almost ready to go. The differentials and shocks come filled with the proper silicone fluids, making it faster and easier than ever to get Exceed RC Mad Code performance out of the box and into the dirt! When we created the Mad Code, we knew we had made something very special for you.   Features: Mad Code ARTR Molded battery tray supports two ROAR-approved 1:8 scale size .21 Engine Factory painted and finished short course truck body. Mounted and assembled scale wheels & tires with foam inserts and bead guards. Low Center of Gravity Design Fuel Tank Alloy steel Turnbuckles for quick adjustability and tuning Dual Bell-crank steering for more consistent steering and reduced bump-steer on rough surfaces Carefully placed battery compartments and center mounted ESC platform and for balance (Electric) Durable and thick hardened plastic suspension arms Anodized 6061 T6 3MM aluminum chassis plate Anodized 4MM Front and Rear aluminum shock tower Massive pre-glued 4.75" Tires mounted on hardened chrome wheels with 17mm hex hub Silicon Fluid sealed Front, Center, and Rear hardened and coated steel gear differentials Heavy duty metal geared steering servo Adjustable threaded aluminum shocks Anodized Aluminum Chassis plate stiffeners Anodized Aluminum differential plates Anodized Aluminum Steering arm Multi-piece adjustable anti roll bar front and rear Full Sealed Ball Bearing Set Front Constant Velocity Driveshaft (CVD) Adjustable Front and Rear Roll Center ** TX/RX are required Engine .21 Cubic Inches 3.5cc Nitro Powered Engine Bearing Ball Bearing Length 25 inches (635mm) Width 11.81 inches (300mm) Height 7.68 inches (195mm) Wheelbase 14.37 inches (365mm) Gear Ratio 1:11:7

Buy from NitroRCX for $244.00

1/8Th Mad Code GP Gas Powered Short Course Limited Edition RTR Ready to Run Rally Car (Blue)
Designed to look just like the full-size Rally Cars, 4WD Racing Edition GP MAD CODE that runs in short course off-road series like the other brand models. Team Exceed RC is proud to announce the Mad Code as the latest edition to our line of 1:8 scale, GP Gas Powered 4WD race truck rally car. Each Mad Code comes decked out with one of three fully racing style truck bodies, wheels and tires. This is the high-performance R/C Rally car in its' class built with Level .21 engine for speed of swiftness, polished aluminum chassis to provide clean look as well as sturdiness, adjustable shocks to have perfect landing, a bigger fuel tank that can hold 150cc. The Exceed RC Mad Code was designed to meet other racing rally cars around the world. It's all here, from the suspension travel, to painted body. The result is the Exceed RC Mad Code, a creation of an unparalleled experience at a level of performance that has never been seen. Underneath the beautifully finished body, and wheels, beats the heart of a Mad Code. The Mad Code comes fully assembled and ready to go. Team Exceed RC 2.4Ghz Radio system are factory installed. The differentials and shocks come filled with the proper silicone fluids, making it faster and easier than ever to get Exceed RC Mad Code performance out of the box and into the dirt! When we created the Mad Code, we knew we had made something very special.   Features: Mad Code RTR Molded battery tray supports two ROAR-approved 1:8 scale size .21 Engine Factory painted and finished short course truck body. Mounted and assembled scale wheels & tires with foam inserts and bead guards. 2.4Ghz Pistol Sport Radio Transmitter Low Center of Gravity Design Fuel Tank Alloy steel Turnbuckles for quick adjustability and tuning Dual Bell-crank steering for more consistent steering and reduced bump-steer on rough surfaces Carefully placed battery compartments and center mounted ESC platform and for balance (Electric) Durable and thick hardened plastic suspension arms Anodized 6061 T6 3MM aluminum chassis plate Anodized 4MM Front and Rear aluminum shock tower Massive pre-glued 4.75" Tires mounted on hardened chrome wheels with 17mm hex hub Silicon Fluid sealed Front, Center, and Rear hardened and coated steel gear differentials Heavy duty metal geared steering servo Adjustable threaded aluminum shocks Anodized Aluminum Chassis plate stiffeners Anodized Aluminum differential plates Anodized Aluminum Steering arm Multi-piece adjustable anti roll bar front and rear Full Sealed Ball Bearing Set Front Constant Velocity Driveshaft (CVD) Adjustable Front and Rear Roll Center Engine .21 Cubic Inches 3.5cc Nitro Powered Engine Bearing Ball Bearing Length 25 inches (635mm) Width 11.81 inches (300mm) Height 7.68 inches (195mm) Wheelbase 14.37 inches (365mm) Gear Ratio 1:11:7 Radio 2.4Ghz Pistol Remote Control

Buy from NitroRCX for $259.00

1/8Th Mad Code GP Gas Powered Short Course Limited Edition RTR Ready to Run Rally Car (Green)
Designed to look just like the full-size Rally Cars, 4WD Racing Edition GP MAD CODE that runs in short course off-road series like the other brand models. Team Exceed RC is proud to announce the Mad Code as the latest edition to our line of 1:8 scale, GP Gas Powered 4WD race truck rally car. Each Mad Code comes decked out with one of three fully racing style truck bodies, wheels and tires. This is the high-performance R/C Rally car in its' class built with Level .21 engine for speed of swiftness, polished aluminum chassis to provide clean look as well as sturdiness, adjustable shocks to have perfect landing, a bigger fuel tank that can hold 150cc. The Exceed RC Mad Code was designed to meet other racing rally cars around the world. It's all here, from the suspension travel, to painted body. The result is the Exceed RC Mad Code, a creation of an unparalleled experience at a level of performance that has never been seen. Underneath the beautifully finished body, and wheels, beats the heart of a Mad Code. The Mad Code comes fully assembled and ready to go. Team Exceed RC 2.4Ghz Radio system are factory installed. The differentials and shocks come filled with the proper silicone fluids, making it faster and easier than ever to get Exceed RC Mad Code performance out of the box and into the dirt! When we created the Mad Code, we knew we had made something very special.   Features: Mad Code RTR Molded battery tray supports two ROAR-approved 1:8 scale size .21 Engine Factory painted and finished short course truck body. Mounted and assembled scale wheels & tires with foam inserts and bead guards. 2.4Ghz Pistol Sport Radio Transmitter Low Center of Gravity Design Fuel Tank Alloy steel Turnbuckles for quick adjustability and tuning Dual Bell-crank steering for more consistent steering and reduced bump-steer on rough surfaces Carefully placed battery compartments and center mounted ESC platform and for balance (Electric) Durable and thick hardened plastic suspension arms Anodized 6061 T6 3MM aluminum chassis plate Anodized 4MM Front and Rear aluminum shock tower Massive pre-glued 4.75" Tires mounted on hardened chrome wheels with 17mm hex hub Silicon Fluid sealed Front, Center, and Rear hardened and coated steel gear differentials Heavy duty metal geared steering servo Adjustable threaded aluminum shocks Anodized Aluminum Chassis plate stiffeners Anodized Aluminum differential plates Anodized Aluminum Steering arm Multi-piece adjustable anti roll bar front and rear Full Sealed Ball Bearing Set Front Constant Velocity Driveshaft (CVD) Adjustable Front and Rear Roll Center Engine .21 Cubic Inches 3.5cc Nitro Powered Engine Bearing Ball Bearing Length 25 inches (635mm) Width 11.81 inches (300mm) Height 7.68 inches (195mm) Wheelbase 14.37 inches (365mm) Gear Ratio 1:11:7 Radio 2.4Ghz Pistol Remote Control

Buy from NitroRCX for $259.00

1/8Th Mad Code GP Gas Powered Short Course Limited Edition RTR Ready to Run Rally Car (Red)
Designed to look just like the full-size Rally Cars, 4WD Racing Edition GP MAD CODE that runs in short course off-road series like the other brand models. Team Exceed RC is proud to announce the Mad Code as the latest edition to our line of 1:8 scale, GP Gas Powered 4WD race truck rally car. Each Mad Code comes decked out with one of three fully racing style truck bodies, wheels and tires. This is the high-performance R/C Rally car in its' class built with Level .21 engine for speed of swiftness, polished aluminum chassis to provide clean look as well as sturdiness, adjustable shocks to have perfect landing, a bigger fuel tank that can hold 150cc. The Exceed RC Mad Code was designed to meet other racing rally cars around the world. It's all here, from the suspension travel, to painted body. The result is the Exceed RC Mad Code, a creation of an unparalleled experience at a level of performance that has never been seen. Underneath the beautifully finished body, and wheels, beats the heart of a Mad Code. The Mad Code comes fully assembled and ready to go. Team Exceed RC 2.4Ghz Radio system are factory installed. The differentials and shocks come filled with the proper silicone fluids, making it faster and easier than ever to get Exceed RC Mad Code performance out of the box and into the dirt! When we created the Mad Code, we knew we had made something very special.   Features: Mad Code RTR Molded battery tray supports two ROAR-approved 1:8 scale size .21 Engine Factory painted and finished short course truck body. Mounted and assembled scale wheels & tires with foam inserts and bead guards. 2.4Ghz Pistol Sport Radio Transmitter Low Center of Gravity Design Fuel Tank Alloy steel Turnbuckles for quick adjustability and tuning Dual Bell-crank steering for more consistent steering and reduced bump-steer on rough surfaces Carefully placed battery compartments and center mounted ESC platform and for balance (Electric) Durable and thick hardened plastic suspension arms Anodized 6061 T6 3MM aluminum chassis plate Anodized 4MM Front and Rear aluminum shock tower Massive pre-glued 4.75" Tires mounted on hardened chrome wheels with 17mm hex hub Silicon Fluid sealed Front, Center, and Rear hardened and coated steel gear differentials Heavy duty metal geared steering servo Adjustable threaded aluminum shocks Anodized Aluminum Chassis plate stiffeners Anodized Aluminum differential plates Anodized Aluminum Steering arm Multi-piece adjustable anti roll bar front and rear Full Sealed Ball Bearing Set Front Constant Velocity Driveshaft (CVD) Adjustable Front and Rear Roll Center Engine .21 Cubic Inches 3.5cc Nitro Powered Engine Bearing Ball Bearing Length 25 inches (635mm) Width 11.81 inches (300mm) Height 7.68 inches (195mm) Wheelbase 14.37 inches (365mm) Gear Ratio 1:11:7 Radio 2.4Ghz Pistol Remote Control

Buy from NitroRCX for $259.00

CEN 1/10 Scale Mercedes Benz CLK-12 Body Shell Fully Painted & Decaled
*Note* This is for the fully painted and decaled body shell only.  No car is included with purchase.  It will fit all 1/10 Scale Nitro Gas Cars.

Buy from NitroRCX for $34.95

Electric Starter for 1/10th and 1/8th Exceed-RC Nitro RC Cars
Estarter for nitro engines With the Electric Starter, you no longer need to pull and pull to get your nitro car started.  Just click it and within seconds, your car will start like magic!  HIGHLY RECOMMENDED for INEXPERIENCED USER WHO WANTS TO JUST ENJOY THE HOBBY!   basic video - how to start a nitro rc car with an electric starter               Brand new electric power starter for all Exceed RC 1/10, 1/8 nitro gas car models If you?re tired of pull-starting your engine then this item is for you! Also known as an Estarter this item mounts directly onto your engine and with the pull of the trigger the electric drill spins the flywheel and presto your engine starts!     Fits all Exceed RC 1/10, 1/8 nitro cars E-Starter comes with everything including with 7.2V 1800 battery, w/UL Charger, w/two back plate.   FAQ - Question: Do I still need to purchase the STARTER KIT if I buy the ESTARTER? Answer:   YES.  They both are different item.  The STARTER KIT is a REQUIRED TOOL to start up the car.  The ESTARTER is an optional tool that makes it EASIER to start the engine for the car.  Basically without the ESTARTER, the users have to pull-start the car.  

Buy from NitroRCX for $29.95

Forza Fire Yellow 2-Speed 4WD Nitro Gas Radio Remote Controlled RC Off-Road Buggy Car RTR .18 Engine
The most popular 1/10 4 wheel drive 2 speed off-road buggy in the world just got better! At each evolutionary step, the Forza has been improved upon to keep it at the peak of the RC off-road buggy field. So how do you make an Forza better? Extra speed, extra adjustability, extra toughness! The new Forza is packed with features that have been suggested by Forza owners: More room for the electronics, easier access to the differentials and transmission, and more suspension adjustability. The result is the best Forza ever. Factory Deal! $159.00 100% Built-Ready-to-Run! Forza 1/10th Scale Nitro RC Buggy! All that is left is for you to do is simply add the nitro fuel and ignite the engine with a starter kit ! Exceed RC's Forza TRUE 1/10th Scale Fuel Powered Radio Controlled Off-Road Buggy.  Brand New, NOT Refurbished. Only $159.00!!! Where else can you find a high quality remote controlled car at this price! And we're not talking about regular rc car.  This one is Nitro Powered! The heart of the Forza truck line has always been a .18 engine with reliable and consistent power for tough off-road driving. With revised porting and crankshaft, internal airflow has been optimized for increased power and torque. FEATURE HIGHLIGHTS: RTR 100% factory assembled with installed engine and radio gear makes getting started easy The 2.5mm lightweight aluminum alloy chassis provides excellent performance and durability   New lightweight suspension arms deliver quick suspension response and reduce the critical sprung weight and overall weight of the car Oil filled shocks with firm tuned springs keep the wheels on the ground   Complete set of ball bearings for low friction and durability The new .18 engine features a new crankcase and upgrades to the cylinder, piston, connecting rod and crankshaft, delivers more power, more torque and extra cooling.   2-Speed transmission for fast acceleration and insane top end speed High capacity fuel tank with perfect caliber makes it impossible to overflow and provides long run times The Forza will be available "Ready-To-Run" making it the highest on-road performance 4-wheel drive nitro racing car available to everybody Completely preassembled with high quality radio gear, painted, trimmed and ready to roll The new .18 (18 CXP) engine provides reliable and consistent power for high performance on-road driving The 2.5mm lightweight aluminum alloy chassis provides excellent performance and durability Excellent differential system design provides quick access to the front or rear differential by removing only few screws. You can now access the front and rear differential for easy maintenance New lightweight suspension arms deliver quick suspension response and reduce the critical sprung weight and overall weight of the car Though metal disk brake system provides efficient deceleration and precise control New lightweight suspension arms deliver quick suspension response and reduce the critical sprung w

Buy from NitroRCX for $149.70

Matrix CEN Nitro Gas Radio Controlled 1/8 Buggy Pro RC Car Kit * Factory Race Edition *
  Manual Action Shot Movie Upgrades Replacements Media   The Matrix Factory Race Kit is what the racing world has been waiting for. This Factory tuned racing buggy will take the racing world by storm! This is the race tuned ancestor to the already race proven Matrix C1 RTR buggy. The Matrix Factory Race Kit holds nothing back and is equipped with the finest materials for racing purposes. Chassis CNC Hard Anodized 7075 Race Chassis Type S: The Matrix Factory Kit Edition comes standard with a Hard Anodized CNC 7075 Aluminum Chassis. Type S for most racing and off-road conditions. The Chassis is milled out to lighten the structure without sacrificing any durability. Type S Chassis offers a wheel base of 324mm-329mm. CNC Chassis Type L is and option chassis and offers a longer wheel base of 330mm-335mm     Drive-Train Type: Shaft-driven all-time 4WD with a center differential Drive Shafts: Constant Velocity steel shafts. Differentials: Sealed 6 gear ultra strong differentials. Silicone filled. Clutch: Aluminum 3pc clutch system Bearings: All sealed ball bearings Chassis Type: Factory Race" CNC 7075 type "S Chassis Radio Tray: lay-down steering servo Braces: Front and Rear Factory Team CNC 7075 chassis Braces Tuning Capabilities Camber: Fully adjustable Caster: 20 degree - 22 degree of caster Front Toe in: Fully adjustable Wheelbase: Adjustable Front Kick-up: 4 or 5 degree Rear anti-squat: 1 or 2 degree Front down travel: Fully adjustable Rear down travel: Fully adjustable Ackermann: 3 positions Dimensions Length: 19inches / 485mm Width: 12inches / 305mm Wheelbase: 324mm-329mm Gearing Pinion / spur: 13 / 46 Suspension Adjustable suspension: 6 hole option shock towers along with 2 hole arm mounting positions. Shocks: Machined anodized aluminum, oil-filled coil over shocks with 3.5mm shock shafts, bladders, and silicone o-rings.     Carbon Fiber Radio Tray and Center Brace: Very attractive Carbon fiber radio tray and center tray ad strength while lightening the buggy. Extremely Durable: The Matrix Factory Kit Edition was designed to perform while offering durability like no other buggy on the market. The first thing that comes to mind when seeing the Matrix is durability, then once you \drive the Matrix Factory Kit Edition you will feel the CENsation of performance.     CNC 7075 Front suspension block: The Matrix Factory Race kit comes with an ultra strong CNC front suspension block in anodized red. CNC 7075 Steel Main T46 Gear       New lightweight CNC aluminum Clutch shoes and 1.1mm Clutch Spring: standard on Factory Race edition. These shoes grab the clutch bell with extreme grip, which allows the buggy to take off on command. CNC aluminum shoes last longer and deliver bottom end clutch power for racing purposes T13 Machined Steel clutch bell: standard on Factory Race edition. Vented to keep the clutch cool and allow debris to exit. Extreme durable and performance guarantee.   &nbs

Buy from NitroRCX for $799.00

MAX Blue RAZOR 1/8th Scale Nitro Gas Radio Remote Controlled Buggy RC Car Ready to Run (RTR) .21 Engine
The most popular 1/8 4 wheel drive off-road buggy in the world just got better! At each evolutionary step, the Razor has been improved upon to keep it at the peak of the RC off-road buggy field. So how do you make an Razor better? Extra speed, extra adjustability, extra toughness! The new Razor is packed with features that have been suggested by Razor owners: More room for the electronics, easier access to the differentials and transmission, and more suspension adjustability. The result is the best Razor ever. 1/8 Scale Exceed-RC Razor Off Road Buggy   AWARDS SINCE 2002 -In 2003, HSP won the fourth place in China 1/8th scale off-road buggy championship tournament. -In 2004, HSP won the third place in Hebao Cup of car model championship tournament. -In 2004, HSP won the fourth place in China 1/8th scale off-road buggy championship tournament. -In 2005, HSP won the second place in China 1/8th scale off-road buggy championship tournament. -In 2006, HSP won the second place in China 1/8th scale off-road buggy championship tournament. The heart of the Razor off-road buggy line has always been a .21 engine with reliable and consistent power for tough off-road driving. With revised porting and crankshaft, internal airflow has been optimized for increased power and torque. Description:   Create a world of disaster with the Exceed-RC 1/8 Scale off road racing buggy! This Powerful RC car includes: three sealed gear differentials, insane big block power, and will soundly trounce most other RTR 1/8 RC buggy in its class, but at a price that can't be beat. The suspension and handling on this RC nitro car are very impressive. The buggy comes with a manual which covers the basics you need to get up and running, two channel AM radio, pre-painted polycarbonate body, full electronics including a metal-gear servo. The Razor 1/8th model also includes the basics to get into 1/8 buggy RC racing, such as a powerful 21CXP engine. The Razor model has all of the same features and parts as the Titan 1/8 Truck .  The hard-anodized 3mm thick chassis is fully countersunk, and the wheel hubs are coated to match for durability. The unique Exceed-RC Razor buggy stand out at the track or bash session!   RTR ¨C factory assembled with installed engine and radio gear makes getting started easy The lightweight aluminum alloy chassis provides excellent performance and durability Front & rear skid plates for impact protection Long stroke oil filled shocks with firm tuned springs keep the wheels on the ground Complete set of ball bearings for low friction and durability High capacity fuel tank with perfect caliber makes it impossible to overflow and provides long run times New lightweight suspension arms deliver quick suspension response and reduce the critical sprung weight and overall weight of the truck The new .21 engine features a new crankcase and upgrades to the cylinder, piston, connecting rod and crankshaft, delivers more power, more torque and extra coo

Buy from NitroRCX for $254.95

MAX Yellow RAZOR 1/8th Scale Nitro Gas Radio Remote Controlled Buggy RC Car Ready to Run (RTR) .21 Engine
The most popular 1/8 4 wheel drive off-road buggy in the world just got better! At each evolutionary step, the Razor has been improved upon to keep it at the peak of the RC off-road buggy field. So how do you make an Razor better? Extra speed, extra adjustability, extra toughness! The new Razor is packed with features that have been suggested by Razor owners: More room for the electronics, easier access to the differentials and transmission, and more suspension adjustability. The result is the best Razor ever. 1/8 Scale Exceed-RC Razor Off Road Buggy   AWARDS SINCE 2002 -In 2003, HSP won the fourth place in China 1/8th scale off-road buggy championship tournament. -In 2004, HSP won the third place in Hebao Cup of car model championship tournament. -In 2004, HSP won the fourth place in China 1/8th scale off-road buggy championship tournament. -In 2005, HSP won the second place in China 1/8th scale off-road buggy championship tournament. -In 2006, HSP won the second place in China 1/8th scale off-road buggy championship tournament. The heart of the Razor off-road buggy line has always been a .21 engine with reliable and consistent power for tough off-road driving. With revised porting and crankshaft, internal airflow has been optimized for increased power and torque. Description:   Create a world of disaster with the Exceed-RC 1/8 Scale off road racing buggy! This Powerful RC car includes: three sealed gear differentials, insane big block power, and will soundly trounce most other RTR 1/8 RC buggy in its class, but at a price that can't be beat. The suspension and handling on this RC nitro car are very impressive. The buggy comes with a manual which covers the basics you need to get up and running, two channel AM radio, pre-painted polycarbonate body, full electronics including a metal-gear servo. The Razor 1/8th model also includes the basics to get into 1/8 buggy RC racing, such as a powerful 21CXP engine. The Razor model has all of the same features and parts as the Titan 1/8 Truck .  The hard-anodized 3mm thick chassis is fully countersunk, and the wheel hubs are coated to match for durability. The unique Exceed-RC Razor buggy stand out at the track or bash session!   RTR ¨C factory assembled with installed engine and radio gear makes getting started easy The lightweight aluminum alloy chassis provides excellent performance and durability Front & rear skid plates for impact protection Long stroke oil filled shocks with firm tuned springs keep the wheels on the ground Complete set of ball bearings for low friction and durability High capacity fuel tank with perfect caliber makes it impossible to overflow and provides long run times New lightweight suspension arms deliver quick suspension response and reduce the critical sprung weight and overall weight of the truck The new .21 engine features a new crankcase and upgrades to the cylinder, piston, connecting rod and crankshaft, delivers more power, more torque and extra coo

Buy from NitroRCX for $699.00

Ready to Run Nitro Gas RC Hyper Speed Buggy Beginner Version, VX 16 Engine,AM Radio Fire Black .16 Engine
** THE GAS CAR IS BRAND NEW ** Exceed RC 1/10 Nitro Competition Racing Remote Control Car, Complete Kit with Body & Engine along with an 2-Channel Pistol Wheel Remote Control w/ 2 SERVOS  !!! READY-TO-RACE OUT OF THE BOX !!! * NEW IN A BOX * The Car Contains all available hop-up parts; body or engine included!!! Designed to compete in national and local competitions, manufactured at a super-modern facility, Exceed RC's nitro r/c gas cars are created with a mind for high performance racing, scale speed of 55mph+. This 4-Wheel-Driven Gas Powered Car is a 1/10th scale that combines many sophisticated performance-enhancing features that represent a culmination of the long years of Exceed RC's design experience. Engine  Beginner Version, VX 16 Engine,AM Radio, 3 kg steering servo Engine  VX 16 Engine Manufacturer  Vertex Transmission  Single speed  Drive System  Four Wheel Drive Radio System  Two Channel A.M. Length  400mm Front Track  215mm Rear Track  205mm Overall Height 170mm Wheelbase  270mm Front Shock Length  85mm Rear Shock Length  85mm Front Tires  Block Tread Rear Tires  Block Tread Wheel Width  32mm (F) - 40mm (R) Wheel Diameter  86mm Chassis Type  2.5mm 6061 Aluminum Alloy Brake Type  Steel Disc Fuel Tank Capacity  75cc Suspension Type  Plastic bodied oil filled shocks Gear Ratio 1:8.038 (Single Speed) Other   OUR CAR HAS PART COMPATIABILITY & MODIFICATIONS WITH OTHER BRANDS LIKE HPI,TRAXX, ETC.  YOU CAN CHANGE THE BODY-KIT INTO LIKE LEXUS, BMW, MERCEDE, ETC.  YOU CAN ALSO MODIFY/UPGRADE THE ENGINE.  ADD NEW TIRES, NEW SUSPENSION, RE-PAINT,+ MORE!!! THIS IS A GREAT KIT FOR ANY AGE, ANYONE !!! Product Description: - 2-Channel Pistol Radio System Included - Assembled Chassis - VX16 High-Torque and Pull Start Engine with Carburetor - Equipped with Tuned Pipe and Air Filter - Front and rear Bevel Gear differentials - 4 wheel Shaft-Drive System. - Adjustable Wishbone Suspension - No-flex chassis design for better performance. - Alloy aluminum upper plate and chassis. - Oil-Filled shock absorber. - Disc-shaped brake system. - Front universal joint shaft. - 75 cc fuel pressure tank. - High impact wheels. - High traction radial tires. - Servo saver linkage system. - Stock engine muffler system. PACKAGE INCLUDE: - 1 x BRAND NEW 15CX ENGINE - 1 x PAINTED BODY CHASSIS - GUN-STYLE REMOTE CONTROL  

Buy from NitroRCX for $109.70